Work Order: NEDF109BUDDXMAS2003a (Optional Part3) The passenger equivalent of the freights' local

Time: 9:35 am

Season: Winter

Weather: Clear

Duration: 1h 22m

Train: CMT#046

Class: 2

 

Picking up Morlan Heights, Setterville and Marshall for the Budds. Our job is to pickup all the 'faithful' employees that have helped NERR to grow and prosper, taking them to a big Christmas Celebration in Ada. Since the Budd's have gotten so far behind, we have been recruited to pickup the locals from where they are working in Morlan Heights and Setterville, transporting them to Marshall, to save a couple of stops. Our itenarary is as follows.

 

McCauleys Cabinets - MC Out2 (Be on the lead track before 9:42 or you won't be a happy camper) :-)

  Hedricks - Run around by Green bldg

  Morlan main branch East - First set of bldgs on right

  Morlan main branch West - Last bldg on left

  Morlan Station - See F10

Setterville Garden Tools - Almost back to last bldg

  Setterville Tool & Die - LCL Freight In

  Setterville Station - See F10

Rock City Station - See F10

Marshall Day Camp - See F10

Marshall Tire&Auto 1 - Big warehouse, first door

  Marshall Tire&Auto 2 - First door on last Warehouse on left

  Marshall Work1 - Last warehouse, then stop at Forklift on the way out (the fork lift stop will have no verification)

  Carnes Fabrics - Almost to bumper

NEER Warehousing - Back to bumper to let passengers off, then move forward even with the Blue Jaguar auto. Stop and get something to eat .. you deserve it! When BUDD#2 comes in at ll:01, the activity will end.

 

Speed limit Max is 50mph. Otherwise as posted

You will receive a notice for each successful pickup. If one is missed or not picked up in the order above, none after that will register. Each notification will give you instructions as to what is next.

 

Problem Meet: The only one is make sure you are on McCauleys lead track by 9:41:30 or it will not be a pretty sight.

                  Also, Morlan Station will be on the F10 monitor at the beginning, but you do not stop there until you come back through the second time.

 

Hope you enjoy

 

RobertR #109 robertr@adfrr.com

 

COMMENTS about the CMT: if you wish to have your monitor in MPH rather than KILO's simply find your "Train Simulator\TRAINS\TRAINSET\NEcmt046" folder, open the cabview folder, open the "kiha31.cvf" file with a unicode editor and move down a couple of sections to where it says:

 

                        Dial (

                                    Type ( SPEEDOMETER DIAL )

                                    Position ( 253 329 19 30 )

                                    Graphic ( ../../KIHA31/cabview/KMHNeedle.ace )

                                    Style ( NEEDLE )

                                    ScaleRange ( 0 120 )

                                    ScalePos ( 240 120 )

                                    Units ( KM_PER_HOUR )

                                    Pivot ( 21 )

                                    DirIncrease ( 0 )

Change the

                                    Units ( KM_PER_HOUR )

to

                                    Units ( MILES_PER_HOUR )

and that will take care of it. The speedo needle will not read correctly, but it shows up okay on the Track Monitor